Mild Steel (MS) Blooms are large-format semi-finished steel products produced via continuous strand casting (CCM) or hot rolling of heavy cast ingots. Characterized by a square or rectangular cross-section where the width and thickness are generally greater than 160 mm (typically 160 × 160 mm up to 350 × 450 mm), blooms exhibit high internal structural density, uniform solidification, and low inclusion rates. Supplied in structural and carbon grades like IS 2062 (E250, E350), SAE 1018, and EN series, in lengths from 4 to 12 meters with flame-cut ends. Primary producers include SAIL, JSPL, Tata Steel, and RINL (Vizag Steel).
Long Products
Mild Steel (MS) H Beam (Wide Flange Beams / Universal Beams / Columns – NPB, WPB) is an engineered structural section featuring parallel flanges with uniform thickness from root to toe, arranged in an H configuration. Manufactured on universal rolling mills from blooms, its cross-sectional geometry provides balance between the major (X-X) and minor (Y-Y) […]
Long Products
Mild Steel (MS) I Beam (Indian Standard Junior/Light/Medium Beams – ISJB, ISLB, ISMB) is a hot-rolled structural steel member featuring an I-shaped cross section with tapered inner flange faces. Produced by hot rolling steel blooms or billets through structural reversing mills, it provides load-bearing capacity along the vertical axis, resisting shear and bending forces. Conforming […]
Long Products
Mild Steel (MS) Billets are continuous cast semi-finished long steel sections characterized by a uniform square profile with cross-sectional areas smaller than blooms, typically ranging from 100 × 100 mm to 160 × 160 mm. Manufactured in continuous casting machines (CCM) from ladle-refined steel, they feature precise corner radii, low surface oscillation marks, and controlled […]
Long Products
Mild Steel (MS) Flat Bar is a solid hot-rolled steel bar with a flat rectangular cross section, manufactured by passing billets through continuous flat rolling mills or by slitting and edging hot rolled master plates. It offers uniform edge geometry (rolled edge or square slit edge), flat surfaces, tensile strength, and formability. Available in grades […]