Mild Steel (MS) Ingots are primary semi-finished casting products formed by pouring liquid steel melted in electric induction furnaces (EIF) or electric arc furnaces (EAF) into tapered vertical cast iron molds. They possess a solid, tapered rectangular cross-section with controlled carbon, manganese, sulfur, and phosphorus chemistry. Conforming to standards such as IS 2830 and IS 2831, these ingots typically range from 70 kg to 200 kg per piece, with carbon content maintained between 0.15% and 0.25%, supplied in as-cast, mill-descaled condition. Produced widely across regional primary and secondary re-rolling plants and induction furnace units across India.
Long Products
Mild Steel (MS) H Beam (Wide Flange Beams / Universal Beams / Columns – NPB, WPB) is an engineered structural section featuring parallel flanges with uniform thickness from root to toe, arranged in an H configuration. Manufactured on universal rolling mills from blooms, its cross-sectional geometry provides balance between the major (X-X) and minor (Y-Y) […]
Long Products
Mild Steel (MS) I Beam (Indian Standard Junior/Light/Medium Beams – ISJB, ISLB, ISMB) is a hot-rolled structural steel member featuring an I-shaped cross section with tapered inner flange faces. Produced by hot rolling steel blooms or billets through structural reversing mills, it provides load-bearing capacity along the vertical axis, resisting shear and bending forces. Conforming […]
Long Products
Mild Steel (MS) Billets are continuous cast semi-finished long steel sections characterized by a uniform square profile with cross-sectional areas smaller than blooms, typically ranging from 100 × 100 mm to 160 × 160 mm. Manufactured in continuous casting machines (CCM) from ladle-refined steel, they feature precise corner radii, low surface oscillation marks, and controlled […]
Long Products
Mild Steel (MS) Flat Bar is a solid hot-rolled steel bar with a flat rectangular cross section, manufactured by passing billets through continuous flat rolling mills or by slitting and edging hot rolled master plates. It offers uniform edge geometry (rolled edge or square slit edge), flat surfaces, tensile strength, and formability. Available in grades […]